Toy of the Week 2: Seamless Cutters and Viva Decor part 2

Sorry for the long title…not sure how I can shorten that, lol.
Hopefully no one is too mad at me for having posted my dislikes about the new (to me) cutters. I edited in my last post and added on the bottom of the post.
Part 2. I like the Viva Decor Inka Gold very much. I hydrated some of the drier paints, but also find that when I moisten my finger a little bit, it immediately puts paint on my finger when gliding it over the paint. They remind me a lot of creamy water colours or eyeshadows. This sheet below, I had mixed up a shade of green clay, ran it through the pasta machine, then ran it through again with a texture (one of Helen Breil’s beautiful patterns) and coloured it with my finger. Although you can layer the paints (and they layer beautifully), after each colour I dip my finger into some water and wipe it clean with a rag. Paint comes off really easily, although I now have some paint under my fingernails. I need to apply new nail polish anyway, ha. Anyway, the coverage of these paints is just fabulous.

I find that you can do as many layers as you want and with each layer, the application gets thicker and bolder. You can see this from left to right. I had just a hint of texture on this clay and on the left you can see it as sort of a painted wash in the crevices. This paint can actually be watered down as well and applied as a wash instead of a wax.

When dry, you can achieve a nice crackle with this also. Hey, you know how much I like to crackle, right? lol. I think this will crackle even better if I put on another coat after it is dry and then crackle…I’ll try this next…but this is with one coat and pretty good.

After I applied paint on this piece I stamped it (Tonja Lenderman Clear stamp)

Ok…enough play for now…I think I’ll create something with these sheets. So I decide to try the sanded seamless cutters. I use the teardrop shapes. I’ve already begun assembling some of them. I’ll be making a drop necklace and some earring with those.

And a close up of the edge for the teardrop. Much better, but I still had to smooth the clay a little bit with my finger. I rather like the shape now. I used a lime and teal Viva Decor Inka Gold on these. I normally work in much darker colours, but thought I should try a little ‘lighter’ for Spring. Plus green goes so nicely with the popular Orange for this season.

I’ve embellished this cabochon  and the flowers on the teardrop with a little Swarovski Crystal. I’ve enjoyed using crystals ever since I started claying way back in the late 80’s. You see those little balls of clay on my piece above? I roll a ball, insert a blunt knitting needle to make a hole. This becomes the bezel for my rhinestone. I insert the stone and use a cartridge-less pen to set the crystal into the bezel. The clay pushes a little bit over the edges of the stone, so I may not need glue. I must be certain that the clay is around all of the edge of the crystal though because otherwise I’ll need to use some glue. Don’t use cyanoacrylate (Zap-a-gap, Krazy Glue etc.) on crystal or glass as it will frost them. It is better to use an epoxy.

After I’ve assembled these…what shall I do next? I have quite a few more toys…Do you want to see?? lol

Toy of the week 2: Seamless cutters

Ever since I heard the word ‘seamless’ I’ve been wanting some of these cutters for my polymer clay use. My round metal ones were getting a bit bent out of shape from their constant use and I needed some teardrop shaped ones.
Btw…my reviews of these products are based on products I purchased, although I wouldn’t mind if companies were going to offer me some for testing, even if my reviews may not be 100% positive, they will be honest. I really wish I had had these cutters to try since although there are 9 cutters in a box, they are not exactly inexpensive. I thought ‘wow NINE cutters, that’s awesome!’ I sprung for the investment because I thought they would last me a long time. But wait there is more! They are safe in the oven up to 160Degrees Celsius or 320Fahrenheit. Great if you wanted to use them for bangles or perhaps for making boxes. They are nested like this…
and you can take out the smallest first, but if you want the largest cutter or anything in between you have to remove them all, because they are concave, that is curving inward rather than convex and curving outward as I think they should have been made! I’ll demonstrate…

I rolled some clay on a #1 (or 9 card thickness). I used the teardrop and a round. You can actually see the the cutters aren’t 100% smooth and will require a bit of sanding on your part. I’m getting more and more annoyed. So I just used my nails to scratch off the roughness and you can see that the edges on the clay just aren’t smooth at all…I rather have a seam on one tiny part of the clay that I can cut away with a blade rather than the whole circumference being rough. But that isn’t the only thing that bothers me…

The other thing is that because the cutters are concave, when you cut out an item, it actually shows. Sometimes I like to use butcher wrap over the clay before cutting to get a nice beveled edge, and even though these cutters create a beveled edge, the bevel is way too pronounced for my liking.

But what about using it to make boxes? Well, the cutters are nice and deep and although concave-ness could work in favor of a box…here is the stupid thing…there is a ridge at the halfway mark! Why? I have no idea…

…but I see two useful purposes for these cutters in regard to polymer clay…One is using them for shallow boxes and for the round cutters, use certain sizes as a bangle sizer/shaper while baking. And the other useful thing is for those with small children because I’m annoyed that I have to play the stacking game to get them back into the container…largest first…

Ok, those were just initial observations from a seamless newbie ;)

Edited to add...yes sanding has helped quite a bit. Observation is the nylon should be thinner for the smaller cutters. I also would prefer straight walls instead of concave. However, all in all the price is right...about $17 for 9...not bad.

Toy of the Week: Viva Decor Inka Gold

I’m adding a new feature to my blog, showing you some of the products I purchase that are useful and a great addition for your polymer clay addiction. I might even show you some products that might be better suited for other crafts.  The ‘Toy of the Week’ will be a glimpse into what you might see when you have the product in front of you.
I’ve been wanting to try more products from Viva Decor and I still plan on writing about them, but the first one on the list is Viva Decor Inka Gold. It’s a combination of metallic paint and waxy rub-on, however, it is water-based, so if it dries out it can be rehydrated with a bit of water. One can’t do that with petroleum paints and waxes. Like Viva Decor Pardo Clay, the Inka Gold main ingredient is beeswax. It is non-toxic, safe and easy to use. Besides polymer clay it can be used on wood, paper, plaster, ceramics and much more. It comes in 18 brilliant and inter-mixable colors.
The sampler kit includes 18 of the colors. The little pots hold 12.5g, but you can buy bigger jars of 50 and even 100grams. The sampler is a great economical start if you want to try all the colors.


These little pots, some of them have black lids and some have silver lids. The ones with black lids have inner lids with a sticky tab, that when removed might be better suited for mineral make-up. A couple of my pots had a messed up sticky tab with dried paint caked on them. The pot on the right has a different inner lid. Anyway, I removed all the inner lids and put them inside plastic baggies. This was a messy job and had to wash and wipe my fingers after removing every one of them. Why not just toss the lids? because frugal me will probably use the paint that is still on them.

Apparently my dry paint pots (and they are really flaky dry!) I’m supposed to simply rehydrate it with some water. I poked holes into the paint and added a few drops. By tomorrow it is supposed to be creamy again. The caution is not to add too much water on the surface or the paint could become mouldy as there are no preservatives. I’ll let you know how it turns out… and I’ll show you a little bit about how it will look on your clay…This was just the teaser, lol.
…stay tuned…
 In the US you can find Viva Decor products at this wonderful Site, Polyclayplay

Viva Decor
The site says they have 20 colors, but that is a misprint.